Factor55


"Windenhaken"


Factor55 sonstiges



Factor55 - FlatLink - rot

  • Für Windenseile (Stahl und Kunststoff) bis zu 3/8" Durchmesser (9,5 mm)
  • Passend für Softschäkel bis 12 mm und 3/4" Stahlschäkel
  • Max. Load: 16.000 pounds ~ 7,25 t
  • Ultimate strength: 40.000 pounds ~ 18,1 t
  • 6000 Aluminium
  • Gewicht 25 oz ~ 710 g
204,90 €

194,90 €

  • 0,7 kg
  • verfügbar
  • 5 - 8 Tage Lieferzeit1

Factor55 - FlatLink - schwarz

  • Für Windenseile (Stahl und Kunststoff) bis zu 3/8" Durchmesser (9,5 mm)
  • Passend für Softschäkel bis 12 mm und 3/4" Stahlschäkel
  • Max. Load: 16.000 pounds ~ 7,25 t
  • Ultimate strength: 40.000 pounds ~ 18,1 t
  • 6000 Aluminium
  • Gewicht 25 oz ~ 710 g
204,90 €

194,90 €

  • 0,7 kg
  • verfügbar
  • 5 - 8 Tage Lieferzeit1

Factor55 - FlatLink Expert - grau

PRODUCT DESCRIPTION

The FlatLink E (Expert) is a variation of our popular foldable standard FlatLink winch shackle mount.  The FlatLink E provides a means to eliminate the conventional  winch hook and replace it with a safer and more secure screw pin shackle resulting in a CLOSED SYSTEM WINCHING operation.  The large pear shaped shackle mounting hole allows for attachment to either the pin or bow end of common screw pin shackles, as well as common OEM recovery points. This makes the new FlatLink E more versatile than the current FlatLink design, but it also adds the possibility of a dangerous shackle side loading condition (See Picture), especially during momentary slack conditions. A shackle side loading condition is not possible with our standard FlatLink shackle mount due to the shackle pin mounting constraint. For the recreational off roader we highly recommend the safer standard FlatLink product, not the FlatLink E. This way the winch operator does not have to monitor whether the shackle may have shifted and rotated in the recovery tackle. The FlatLink E is only available in the Military Specification Anodizing (Mil-A-8625 F Type III) hard anodized gray finish.

Conventional winch hooks can cut and fray recovery straps and often allow strap ends to escape during momentary slack cycles of a typical winching recovery.  Screw pin shackles do not allow strap loops to escape due to their secure screw pin attachment.   The FlatLink E does not require splicing and is compatible with steel cables or synthetic ropes up to 3/8 inches in diameter.  The cable eye is retained in the FlatLink E by a 5/8 inch diameter 6Al4V Titanium double shear pin and internal snap ring.  Installation takes only minutes.  The EPDM Rubber Guards protect alloy fairleads and are securely attached to the FlatLink E with 4 barbed tips each.  The FlatLink E stows neatly against either roller or Hawse type fairleads and is designed to be used with common 3/4 inch shackles.

MADE IN THE USA

U.S. Utility Patent No. 9,388,025
Foreign Patents Pending

PRODUCT SPECIFICATIONS

  • MADE IN THE USA
  • Precision machined from 6000 series billet aluminum
  • Compatible with all roller fairlead license plate mounting brackets
  • When folded flat – less than 1.75 inches of thickness
  • Weight – 26 ounces
  • Max load rating : 16,000 pounds
  • Ultimate failure : greater than 40,000 pounds
  • Fits steel cables and synthetic winch ropes to 3/8 inch diameters
  • EPDM Rubber Guard protects alloy fairleads and cushions line stowage
  • Simple snap ring removal for shear pin
  • Fits common 3/4 shackles/D-Rings
  • Eliminates hook rattle and fairlead damage
224,90 €

214,90 €

  • 0,7 kg
  • verfügbar
  • 5 - 8 Tage Lieferzeit1

Factor55 - FlatLink Multimount - grau

PRODUCT DESCRIPTION

FlatLink MultiMount is designed for difficult off camber vehicle recovery scenarios where two different winch pull directions are often necessary. The two additional shackle pin mounting holes provide secure shackle attach points for multiple winch pull directions, while the center hole provides a secure conventional center pull shackle mount point. This arrangement eliminates any shackle side loading forces at the Multimount interface ( Shackles are free to rotate and align to the load directions).

Winching with a bridle arrangement is also possible by using the two outer shackle pin mounting holes in combination with common bridle rigging. Similar to the rest of the FlatLink product line, the MultiMount may be folded flat against fairlead surfaces when stowed, resulting in minimal impact to vehicle approach angles. Engineered, Tested, and Made In The USA.
259,90 €

249,90 €

  • 0,9 kg
  • verfügbar
  • 5 - 8 Tage Lieferzeit1

Factor55 - ProLink - schwarz

  • Für Windenseile (Stahl und Kunststoff) bis zu 3/8" Durchmesser (9,5 mm)
  • Passend für Softschäkel bis 12 mm und 3/4" Stahlschäkel
  • Max. Load: 16.000 pounds ~ 7,25 t
  • Ultimate strength: 40.000 pounds ~ 18,1 t
  • 6000 Aluminium
  • Gewicht 21 oz ~ 600 g
209,90 €

199,90 €

  • 0,6 kg
  • verfügbar
  • 5 - 8 Tage Lieferzeit1

Factor55 - ProLink XTV - schwarz

Shackle/D-ring mount for UTV and ATV winch lines

The ProLink XTV allows UTV and ATV winch owners to replace the conventional winch hook with a safer and stronger shackle/D-Ring. Winch hooks can cut and fray recovery straps and often allow strap ends to escape during typical loose/tight cycles of a winching recovery. Screw pin shackles do not allow strap loops to escape due to the secure screw pin attachment. The ProLink XTV does not require splicing and is compatible with steel cables or synthetic ropes up to 5/16 inches (für Windenseile bis 8 mm). The cable eye is retained in the ProLink XTV by a 7/16 inch diameter titanium double shear pin and internal snap ring. It is easily installed in minutes. The EPDM Rubber Guard protects alloy fairleads and is securely attached to the ProLink XTV with 4 barbed tips.

The ProLink XTV stows neatly against either roller or Hawse type fairleads and is designed to be used with common standard ½ – 5/8 inch shackles. (passend für 1/2" und 5/8" Stahlschäkel) MADE IN THE USA, the ProLink XTV is constructed of 6000 series billet aluminum and 6Al-4V titanium and is anodized/powder coated in 5 different colors. The ProLink has a max load rating of 6000 pounds (Arbeitslast 2,7 t) and an ultimate failure of 22,000 pounds (Bruchlast 9,9t).

Gewicht 236 g

149,90 €

139,90 €

  • 0,25 kg
  • verfügbar
  • 5 - 8 Tage Lieferzeit1

Factor55 - ProLink Expert - schwarz

PRODUCT DESCRIPTION

PROLINK EXPERT

  • Replace conventional winch hooks with a safer more secure shackle/D-ring
  • Lightweight – Precision CNC machined 6000 series aluminum
  • No splicing required – titanium double shear pin design
  • Designed for both steel cables and synthetic winch ropes
  • Integrated EPDM rubber boot for fairlead protection
  • Connects to either the pin or bow end of common ¾” screw pin shackles
  • Connects to the pin ends of 7/8” and 1” screw pin shackles
  • Fits over most OEM tow hooks
  • WARNING: Keep forces in line.  DO NOT SIDE LOAD SHACKLE

 

  • For rope and cable diameters up to 3/8’’
  • Fits common 3/4’’ screw pin shackles/D-rings
  • Mil-Spec anodized or powder coated
  • 5/8” diameter 6AI-4V titanium double shear pin
  • Max Load: 16,000 pounds
  • Ultimate Strength: 40,000 pounds
  • Weight: 30oz
259,90 €

249,90 €

  • 0,9 kg
  • verfügbar
  • 5 - 8 Tage Lieferzeit1

Factor55 - UltraHook - grau

The world’s safest winch hook.

Featuring Industry first Closed System Shackle Mount hole machined into the body of the hook, safety latch retraction pocket resulting in a clear throat opening, integrated secondary safety latch locking feature-latch locking pin stored in the body of the UltraHook which can be removed and inserted in to the hook tip, locking the latch into place.

EPDM rubber pads for fairlead protection, titanium double shear pin, and a finger grip feature that promotes proper “Hook Up” orientation.

The first winch hook that can be stored against your fairlead protecting either your hawse or roller style fairlead from a metal to metal connection.

Made in USA

US Utility Patent No. 10,202,260 – Combination Hook/Shackle mount (Factor 55 UltraHook Product), PCT – PCT/US2016/059764
Europe – 16794489.1
Australia – 2016344016
China – 2016800732172

PRODUCT SPECIFICATIONS

  • The industry’s first winch hook with an integrated shackle pin mount
  • Two methods of use: conventional hook opening, or shackle mount
  • Shackle pin mount allows the safer practice of Closed System Winching
  • Finger grip feature promotes proper “Hook Up” orientation
  • Double locking safety clasp – lock the safety clasp with the included clevis pin
  • Latch lock clevis pin stored conveniently in hook body
  • Integrated EPDM rubber pads for fairlead surface protection
  • Max opening deformation clearly laser engraved
  • Lightweight – Precision CNC machined 7000 series Military Grade Aluminum
  • No rope splicing required – double shear pin design accepts rope/cable eyes
  • Designed for both steel cables and synthetic winch ropes
  • Foldable to stow rattle free against fairleads
  • Shackle pin mounting hole accepts ¾ shackle pins (.875” diameter)
  • For rope and cable diameters up to 3/8’’
  • Available in the Military Specification Hard Anodizing (Mil-A-8625 F Type III) Gray
  • 5/8” diameter 6AI-4V grade V titanium double shear pin
  • Max Rated Load: 16,000 pounds
  • Ultimate Strength – Hook Throat Opening: 31,000 pounds
  • Ultimate Strength – Shackle Pin Mount: 48,000 pounds
  • Weight: 32oz

MADE IN THE USA

299,90 €

289,90 €

  • 0,9 kg
  • verfügbar
  • 5 - 8 Tage Lieferzeit1

Factor55 - UltraHook XTV - grau


The world’s safest UTV/ATV winch hook.
 Featuring Industry first Closed System Shackle Mount hole machined into the body of the hook, safety latch retraction pocket resulting in a clear throat opening, integrated secondary safety latch locking feature-latch locking pin stored in the body of the UltraHook XTV which can be removed and inserted in to the hook tip, locking the latch into place. EPDM rubber pads for fairlead protection, titanium double shear pin, and a finger grip feature that promotes proper “Hook Up” orientation. The first winch hook that can be stored against your fairlead protecting either your hawse or roller style fairlead from a metal to metal connection.

  • Shackle pin mounting hole accepts screw pins from common 5/8″ shackles (3/4″ diameter pins)
  • For rope and cable diameters up to 5/16″ (bis 8mm Seildurchmesser)
  • Available in Military Specification Hard Anodizing (MIL-A-8625 F Type III) Gray
  • 7/16″ diameter 6AI-4V grade V titanium double shear pin
  • Max Rated Load: 10,000 pounds (4,5 t)
  • Breaking Strength: 21,000 pounds (9,5 t) 
  • Weight: 21oz
  • Overall Dimensions: 5.75″ x 3.4″ (14,6 x 8,6 cm)

Made in USA U.S. Utility Patent No. 9,388,025 Foreign Patents Pending

*NOTE- This product is intended for use with winch capacities of 6000 lbs and less.
Nur mit Winden nutzen, die 2,7 t oder weniger Zugkraft haben.

239,90 €

229,90 €

  • 0,9 kg
  • verfügbar
  • 5 - 8 Tage Lieferzeit1

Factor55 - Hitch Link 2" schwarz

Factor 55 2" Recovery Einschub eloxiert


- Made in USA
- CNC gefertigt aus "6000" Aluminium, daher extrem leicht
- passend für 2"-AHK
- passend für 3/4" D-Ring Schäkel
- 4,3 t Zugfestigkeit 

- Gewicht 0,91 kg

- ohne BefestigungsPin

114,90 €

  • 0,91 kg
  • verfügbar
  • 5 - 8 Tage Lieferzeit1